Ngwaahịa
Igwe ntinye Panasonic RG131-S
Nkọwa
Ọsọ ntinye dị elu yana arụmọrụ arụ ọrụ na-eme ka arụpụta ọrụ dịkwuo mma
● Ma otu n'ime 2-pitch (2.5mm / 5.0mm), 3-pitch (2.5mm / 5.0mm / 7.5mm) ma ọ bụ 4-pitch (2.5mm / 5.0mm / 7.5mm / 10.0mm) spec.enwere ike ịhọrọ maka ntinye ntinye.
●Ezitere ntinye ọsọ ọsọ dị elu n'etiti 0.25 s na 0.6 s kwa akụrụngwa.ọbụna maka nnukwu-size components na 3-pitch (2.5mm/5.0mm/7.5mm) ma ọ bụ 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) spec.
●Ojiji ntụ ntụ na-eme ka ntinye njupụta dị elu kwe omume mgbe enwere oghere n'etiti ihe ndị mejupụtara.
Ọrụ mmezi onwe ya zuru oke na-eme ka ntụkwasị obi dị elu
● Ọrụ nkwụsị nke onwe ya zuru oke na-ekpuchi elu dum nke mbadamba PC na-eme ka ntinye ziri ezi.
Obere akara ukwu, mmụba na nrụpụta mpaghara
●RG131-S na-eji otu ntọala ahụ dị ka ọdụ RL132-40, si otú a na-ebelata akara ukwu site na 40%.Nrụpụta mpaghara na-abawanye site na 40%.*
* Tụnyere RG131 (ụlọ ọrụ 40)
Mbelata ọnụ ahịa ịgba ọsọ
●Akụkụ nke RG131-S dị ka Anvil agụba, ndu cutter, chuck roba na pusher roba dakọtara na nke RHSG.
● Usoro mbufe, tebụl XY, onye na-ahụ maka njikwa na onye ọkwọ ụgbọ ala nwere ike iji mee ihe ọ bụla n'ime usoro ntinye igwe.
A na-ahazi nhazi na nrụzi ọrụ.
nkwalite arụmọrụ
● A na-arụ ọrụ ogwe aka kristal mmiri mmiri maka njikwa njikwa na ọrụ dị mfe nwere ike inye site na ntụziaka nduzi ọrụ.
Enwere ike họrọ Japanese, Bekee ma ọ bụ Chinese site na otu ọrụ mmetụ dị ka asụsụ ejiri mee ihe ngosi ihuenyo.
● Onye njikwa ọhụrụ ahụ nwere ike ịchekwa ihe ruru ụdị mmemme 200.Enwere ike itinye data na kaadị ebe nchekwa SD dị elu.
●NC data nke anyị ot akụrụngwa (RH usoro) nwere ike iji RG131-S.
● A na-enye ọrụ nkwado ntọala nke na-egosipụta nhazi akụrụngwa nke akụrụngwa akụrụngwa na ihuenyo.
●A na-enye ọrụ nkwado nkwado nke na-egosipụta ozi nke oge mmezi oge na ọdịnaya arụ ọrụ.
Nhọrọ ọrụ nkwalite
●Nhọrọ nkwado PCB buru ibu na-enye ohere nnabata oghere na ntinye ruo nha PCB nke Max.650 mm x 381 mm.
●2 Nhọrọ mbufe PCB nwere ike ibelata oge ntinye PCB site na ọkara ma mụbaa nrụpụta.
Nke a dị irè karịsịa mgbe ihe ntinye ntinye dị ole na ole.
AR-DCE (ihe nlereanya No. NM-EJS4B) Data Creation & Editor System
● Akụrụngwa mmemme AR-DCE nwere ike dezie ma kwalite mmemme ahụ na-anọghị n'ịntanetị na-emetụtaghị ọrụ igwe.
Nkọwapụta
| NJ nlereanya | RG131-S |
| Ụdị No. | NM-EJR7A |
| Akụkụ PCB (mm) | L 50 x W 50 ruo L 508 x W 381 |
| Oke.ọsọ*1 | 0.25 s / akụrụngwa ruo 0.6 s / akụrụngwa |
| Ọnụọgụ ntinye akụrụngwa | 40 |
| Ngwa ndị ọdabara | Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mmHeight Hn=Max.Dayameta 26 mm D=Max.18 mmResistor, Electrolytic capacitor, seramiiki capacitor, ikanam, transistor, iyo, netwọk resistor |
| PCB mgbanwe oge | ihe dị ka 2 s ruo ihe dịka 4 s (ọnụ ụlọ okpomọkụ 20ºC) |
| Ntuziaka ntinye | 4 ntụziaka (0 Celsius, 90 Celsius, -90 Celsius, 180 Celsius) |
| Isi iyi eletrik * 2 | 3-adọ AC 200 V, 3.5 kVA |
| Isi iyi pneumatic | 0.5 MPa, 80 l/min (ANR) |
| Akụkụ (mm) | W 2 104 x D 2 183 x H1 620 *3 |
| Mass | 1950 n'arọ |
*1: N'ọnọdụ
*2: dakọtara na 3-phase 220/380/400/420/480V
*3: Ewezuga ụlọ elu mgbama
* Uru dị ka oke ọsọ nwere ike ịdịgasị iche dabere na ọnọdụ arụ ọrụ.
* Biko rụtụ aka na akwụkwọ nta “Nkọwapụta” maka nkọwa.
Hot Tags: panasonic ntinye igwe rg131-s, china, ndị na-emepụta, suppliers, N'ogbe, ịzụta, ụlọ ọrụ
